Out of stock
Dark Ambient Echo
Dark & ambient covering slapback to spacious delay lines. The Dark Master is voiced to emulate old tape echos and is designed to give you an almost reverb-like ambience. In similar fashion of older tape echos, the more you push the boundaries of the effect the resulting sounds start to get more noisy/lo-fi.
The Dark Master has an all-analog dry signal with digital wet signal. The pedal has true bypass switching and the ability to boost your signal in order to tailor its output to your specific setup.
MIX: This is your Wet/Dry blend. At minimum, you’ll get no wet delay signal. As you turn it up, you increase the volume of the delay line and maximum the delay line is slightly louder than your dry signal.
LEVEL: This is the Dark Master’s output volume. Unity sits around 1 or 2 o’clock and you able to boost your signal a little bit to compensate for any perceived volume loss.
TIME: This controls the Dark Master’s delay speed. Lower settings will give you shorter repeats and higher settings will give you longer repeats. The delay time goes up to about 500ms.
FDBK: Feedback controls the amount of delay repeats. At minimum, you get a single repeat. As you turn the knob up, you’ll introduce more delay repeats. When you get to the upper limit of the the control, the Dark Master will start to self oscillate.
Power: Use only a 9v center negative 2.1mm power supply. We recommend using an isolated power supply to avoid noise issues.
Dimensions: Length: 120 x 94 x 34 mm
Switching: True bypass soft switching
Current Draw: 63mA
Note: International orders may be subject to customs fees. All additional fees are buyer’s responsibility.
Returns accepted within 3 days of delivery buyer pays return shipping.