Dark Master Echo

Ancient Echoes And Modern Shadows

From the haunted halls of analog history comes a device born of decay, shadow, and space—the Dark Master Echo. Inspired by the hypnotic pulse of vintage tape echo machines, this ambient delay pedal channels the warm, warbled reflections of the past into a powerful, modern tool for sonic exploration.

More than just an echo—this is atmosphere in a box. A ghostly chorus of repeats, filtered through the haze of lo-fi imperfection, ready to haunt every riff, lead, or droning wall of sound. With up to 500ms of delay time and a tone-shaping Dark control, the Dark Master doesn’t just repeat your signal—it buries it in depth, character, and mystery.

At its core, the Dark Master features an all-analog dry path for uncolored tone and a digital wet path for delay repeats full of darkened texture. Whether you’re summoning subtle ambiance or chasing self-oscillating madness, this pedal gives you full command over your echo trail with intuitive, powerful controls.

The Dark Master Echo is your guide to the depths of analog ambiance and experimental delay. Built for players who value mood, texture, and atmosphere as much as volume and aggression. Pair it with fuzz for soaring post-apocalyptic tones or run it clean for haunting, minimalist reflections.

 

 

Controls

MIX: Balance the wet/dry blend. Push it for washed-out chaos or pull it back for subtle shadows beneath your notes

Dark: A lo-pass filter that shapes the repeats. Turn it clockwise to strip away treble and plunge the echoes into warm, tape-inspired darkness

TIME: Adjust the delay length. From short slapback textures to long, lingering repeats (up to ~500ms)

FDBK: Controls the number of repeats. At low settings, a single ghost trails your note. Cranked up, the Dark Master can spiral into eerie, self-oscillating soundscapes

 

Specifications

Power: 9V center-negative 2.1mm isolated power supply only

Dimensions: 120 x 94 x 34 mm

Switching: True bypass soft-touch switching for silent operation

Current Draw: 65mA

Dry Path: All-analog

Wet Path: Digital delay with tone-shaping

 

 

Note: International orders may be subject to customs fees. All additional fees are buyer’s responsibility.

Returns accepted within 3 days of delivery buyer pays return shipping.

Doom Metal IR Pack

Doom Metal IR Pack (Download)

The Fuzzlord Effects Doom Metal IR Pack comes with 6 different speaker cabinet emulations that can handle all of the low tunings and fuzzed out riffs that Doom Metal is made of while still providing clairty in a mix. This IR pack features two classic 4x12s, three different oversized 12″ cabinets, and ground shaking 1×12 1×15 ported cabinet as well as the individual speaker IRs.

IR’s engineered by Jason Johnson using a pair of SM57 to capture the live sound of each of the speaker cab voicings used in the Fuzzlord Effects recordings. All of our favorite speaker cabinet voicings using high quality speakers like greenbacks and a variety of boutique speakers specifically voiced for low tunings and heavy distortion.

 

Cabinets

Dragonaut 4×12″ – Recreating the sound of a 80s English 300w 4×12″ featuring G12T-75 speakers. Classic metal grind and punch.
Earth Shaker 1×12″ 1×15″ – Oversized ported 200 w cabinet with a 12″/15″ speaker voiced for Doom Metal. Kvlt series speakers.
Studio 1×12″ – Oversized single 12″ cabinet with a greenback speaker. Classic sound with punch and clarity.
Boutique 2×12″ – Oversized finger joined 2×12″ 400w cabinet with Kvlt series speakers voiced for guitar/bass. Heavy bass and mids, dark sound, Kvlt series speaker.
Purple 4×12″ – Boutique 4×12″ 400w cabinet featuring modern high wattage greenback style speaker with cones tuned lower to 55 Hz.
Iommist 4×12″ – Modern British 320w cabinet loaded with 70 Eighty speakers.

 

System Requirements
Impulse Response Loader (Two Notes Torpedo, Wall Of Sound, Reaper etc)
Amp sim, guitar amp with DI or load box, or preamp pedal

 

Specifications
IRs recorded at 44.1kHz
Speaker IRs marked with “C” are recorded in axis with SM57
Speakers IRs marked with “OA” are recorded off axis with SM57

Fuzz Trucker

Classic trucker cap.

Made to order, ships in a few days.

• 47% cotton, 28% nylon, 25% polyester
• Structured, five-panel, high profile
• Flat bill
• Snapback closure
• Snapback closure
• Head circumference: 21⅝″–23⅝″ (53.3 cm–58.4 cm)

HM-6

Death By Chainsaw

From the cold steel of Scandinavian death metal to the darkest corners of underground punk and grind, one sound has echoed louder than the rest—the unmistakable roar of the HM-2. Now, that chainsaw fury has been reimagined and refined in the Fuzzlord HM-6, a distortion monster built to honor the legacy of the original while evolving it for today’s heaviest players.

This isn’t just a clone. The HM-6 is a total reconstruction of the iconic Swedish death metal tone, rebuilt from the ground up with expanded controls, a modern active EQ, and a clean blend circuit designed for low tunings and full-frequency domination. It’s tuned to crush on both guitar and bass, offering punishing distortion with enough clarity and control to cut through any mix like a buzzsaw.

At the heart of the HM-6 lies a gyrator-based 3-band EQ, giving you surgical tone-shaping power far beyond the original. Boost the lows for tectonic chugs, carve the mids for that signature chainsaw growl, or boost the highs for slicing clarity in dense arrangements. Whether you’re chasing that classic Entombed-style grind or crafting your own modern wall of sound, the HM-6 is the weapon of choice.

And for bass players or downtuned riff warriors, the HM-6’s boosted clean blend circuit is a game-changer. It reintegrates clean signal with a full-frequency range and natural feel—preserving note articulation, low-end punch, and dynamic control even in the most chaotic distortion settings. Unlike traditional blend circuits that can feel abrupt or thin, this one is smooth, responsive, and voiced for real-world musical use.

 

Controls

V: Command your output and push your amp into overdrive with massive volume

G: From gritty textures to full-on chainsaw devastation, dial in the perfect level of destruction

C: Reinstate clean signal with a boosted, full-frequency blend that brings clarity and power—ideal for bass, downtuning, or players who want the best of both worlds

B: Sculpt thunderous low-end response. Add punch and rumble without losing definition

M: Dial in the legendary Swedish death metal scoop or push it forward for grinding, aggressive mids that cut through dense mixes

T: Shape your top end, from dark and brooding to razor-sharp and biting

With this expanded EQ and blend system, the HM-6 becomes more than just a genre pedal—it’s a versatile, pro-level distortion engine ready for any sonic battlefield.

 

 

Specifications

Power: Use a 9v center negative 2.1mm isolated power supply

Dimensions: 120 x 94 x 42.5 mm

Switching: True bypass soft switching

Current Draw: 60mA

Finish: Rugged powder coated enclosure with UV printed graphics

EQ: Active 3-band gyrator-based EQ

Clean Blend: Full-frequency boosted blend circuit

 

Note: International orders may be subject to customs fees. All additional fees are buyer’s responsibility.

Returns accepted within 3 days of delivery buyer pays return shipping.